This calculator was created to give an approximate value for measurement
error based upon the values entered. Input the frequency to be measured
(in Hz), then select the timebase, the model of the frequency counter,
and the arming (triggering) mode to be used. You can view the assumptions
made in calculating the measurement error by selecting Assumptions below
"THE MEASUREMENT ERROR" result.
Select Assumptions for details in calculating Total Measurement Error and Time Base Error.
Select Details to show values for Time Base Error, RMS Resolution, Systematic Uncertainty, and LSD (Least Significant Digit) Displayed, which will help if you wish to follow and/or customize the formulas given in the manuals and data sheet.
Show | None |
Assumptions | |
Details |